軸承圖紙有關術語
      代號或件號 CODE 或 ITEM
      名稱 NAME
      數量 QUANTITY（空間不夠也可縮寫成Q＇TY)
      材料 MATERIAL
      規格 SPECIFICATION 或 SIZE
      尺寸 DIMENSION
      圖號 DRAWING NO. (DWG. NUMBER)
      總（裝配）圖 ASSEMBLY DRAWING (ASS＇Y DRAWING)
      祥圖 DETAIL DRAWING
      比例 SCALE
      重量 WEIGHT
      設計 CREATED BY
      繪圖 DRAWN BY
      校對 COLLATED BY
      工藝 TECHNOLOGY
      標準化 STANDARDIZED BY
      批準 APPROVED BY
      審核 CHECKED BY
      日期 DATE
      標記 MARKER
      處數 REVISE
      更改文件號 REVERSION
      簽字 SIGNATURE
      1. 基本額定載荷Cr=30.8KN，Cor=34KN BASIC RATING LOAD Cr=30.8KN, Cor=34KN
      2. 在100N載荷下測量軸向游隙0.05-0.09 AXIAL CLEARANCE UNDER MEASURING LOAD 100N 0.05-0.09
      3. 油脂：SHELL ALANIA RL3，總注入量6.5-8.0g GREASE TYPE SHELL ALANIA RL3, 6.5-8.0g TOTALLY
      4. 軸承旋轉應平穩，靈活，無阻滯現象。 THE ROTATION OF BEARING SHALL BE SMOOTHLY WITHOUT BEING BLOCKED
      5. 兩內圈內孔直徑差不超過0.006mm。 BORE DIAMETER OF INNER RINGS MUST BE EQUAL WITHIN 0.006mm.
      6. 滾動體中心￠50.5mm，兩排滾動體間距17。 PITCH DIAMETER OF BALL SET IS ￠50.5mm, DISTANCE BETWEEN THE CENTRE OF TWO ROW BALLS IS 17mm
      7. 僅在外圈帶導向槽一側的同側內圈蝕刻刻字￠42.8mm，字高1.2mm。 MARKING ONLY ON INNER RING FROM THE SAME SIDE OF THE OUTER RING WITH THE SPECIAL CHAMFER AS ￠42.8mm, HIGH 1.2mm
      8. 接觸角 35° + 5° CONTACT ANGLE IS 35° + 5°
      9. 外密封圈顏色為紅色。 THE COLOR OF THE OUTER SEALS ARE RED.